Position #1: Flex 5000 Software Defined Radio. It runs all modes on all bands. Acom 2000A Automatic Linear Amplifier with an output of 1,500 watts. Items beneath microphone (Electrovoice RE-27A) are Bellari audio processing units. All functions are displayed on two 21 inch color monitors. Wattmeter (between monitors) is an Array Solutions Power Master. Computer that runs the transmitter/receiver is a dual processor Intel configuration running at 3 gigabytes. Antenna is a 3 element Steppir yagi on a rotatable tower at the 50 foot level.Other antennas are an inverted V for 80 meters, an 800 foot horizontal loop and an all band Windom.

Position #2: A Johnson Viking Ranger transmitter driving a Johnson Viking Desk Kilowatt Amplifier. The receiver is a National NC-303. Microphone is an Electrovoice RE-27A. Audio processing equipment sitting on top of the NC-303 is a Symetrix 528E Voice Processor and a Dorrough Discriminate Audio Processor. Wattmeter is a Signal Crafter 30.

Position #3: A Central Electronics 100V transmitter that drives a Central Electronics 600L linear amplifier to about 400 watts in the SSB and AM modes. The receiver is a Collins 75A4. Microphone is an Electrovoice RE-27A.

Position #4: This is a total military setup. The 1st receiver BC-348 (black box at the top) and the transmitter ART-13 (black box at the bottom were pulled from a World War II B-17 aircraft.  The two middle grey boxes are a Collins R-390A receiver and a TMC SSB Converter.

Position #5: Globe King 500C transmitter and a Hallicrafters SX-28A Receiver. Microphone is a D-104.

.